|
FAST WAX
General Purpose Wax Thermal Transfer Ribbons
|
- Excellent print quality at high print speeds
- Good coverage on uncoated paper tag and label stocks
- Reduced printhead energy requirements extend printhead life
|
Applications:
- General purpose labeling
- Shipping, warehousing, and receiving labeling
- Print and apply applications
- Shipping and address labels
- Retail tag and label applications
- Apparel product labeling
- Compliance labeling
|
Recommended Media:
- Uncoated paper tag and label stock
- Coated paper tag and label stock
|
TECHNICAL SPECIFICATIONS
- Film Thickness: 4.5 Microns
- Total Ribbon Thickness: 6.8 Microns
- Transmission Density: 1.85 MacBeth Scale
- Ink Melting Point: 64º C,
147º F
- Recommended Maximum Print Speed: 12 IPS
|
STAR DIAGRAM
This diagram is representative of Fast Wax used in general purpose
applications when printing on coated tag and label stocks. Performance ratings
are based on a comparison of ribbons within the general purpose wax category.
Scale 1 to 5, 5 being the best. |
 |
| STORAGE CONDITIONS To ensure optimal performance, please adhere to the following
environmental conditions for use, shipping and storage.
- For optimal print results, thermal transfer printing should occur in
the temperature range of 5º C (41º F) to 35º C (95º F) at 45% to
85% relative humidity.
- Recommended shipping conditions for up to one month duration are
-5º C (23º F) to 45º C (113º F) at 20% to 85% relative
humidity.
- To ensure the ribbon’s performance, our suggested storage conditions
for up to one year duration are -5º C (23º F) to 40º C
(104º F) at 20% to 85% relative humidity.
|
|
Please Note: Exposing IIMAK Thermal Transfer Ribbons to
direct sunlight or moisture will cause damage to the ribbons. |
| |
