|
NET RESIN™
Super Premium Resin Thermal Transfer Ribbons
For use on Near
Edge Printers
|
- Incorporates IIMAK’s Near Edge Technology (NETä ) for
maximum performance on printers with near edge printheads
- Excellent print quality
- Superior resistance to abrasion, heat (150C), and a variety of chemicals
including, but not limited to:
- Gasoline
- Antifreeze
- Engine Oil
- Bleach
- Isopropyl Alcohol
- Hexane
- Methanol
- Sulfuric Acid
- Designed for harsh environment labeling applications:
- Textile and apparel applications
- Nursery and lumber applications
- Outdoor applications
- Chemical drum applications
- Medical and pharmaceutical applications
- Industrial applications
- Automotive applications
- Flexible packaging applications
- Recommended Media:
- Polyethylene films
- Polyproylene films
- Polyester films
|
TECHNICAL SPECIFICATIONS
- Film Thickness: 4.5
Microns
- Total Ribbon
Thickness: 7.0 Microns
Transmission
Density: 1.2 MacBeth Scale
Ink Melting Point:
85° C, 185° F
Recommended Maximum
Print Speed: 8 ips
|
STAR DIAGRAM
This diagram is representative of
NET ResinÔ used in super premium applications when
printing on polyester film labels. Performance ratings are based on a comparison
of ribbons within the super premium resin category. Scale 1 to 5, 5 being the
best.
|
 |
| |
|
STORAGE CONDITIONS |
|
To ensure optimal performance, please adhere to the following
environmental conditions for use, shipping and storage.
- For optimal print results, thermal transfer printing should occur in
the temperature range of 5º C (41º F) to 35º C (95º F) at 45%
to 85% relative humidity.
- Recommended shipping conditions for up to one month duration are
-5º C (23º F) to 45º C (113º F) at 20% to 85% relative
humidity.
- To ensure the ribbon’s performance, our suggested storage conditions
for up to one year duration are -5º C (23º F) to 40º C
(104º F) at 20% to 85% relative humidity.
Please Note: Exposing IIMAK Thermal Transfer Ribbons
to direct sunlight or moisture will cause damage to the ribbons.
|
